Sporlan Controls 952960 IB6Q INTERFACE BOARD PARKER 952960 IB6Q (ASP) Locn G9D135 MOUNT the BOARD The IB Series is based on a 3.0” x 3.0” circuit card with 0.125” mounting holes, 0.25” from each corner. If desired, these mounting holes may be used with customer supplied nonmetallic standoffs. The IB Series does, however, come supplied witha length of snap-in plastic track. The track should be mounted in the desired LOCAIION and one side of the IB engaged in the upper groove in the track. The IB is then pushed down so that the opposite side of the board snaps into the uppermost groove in the opposite side of the track. The board may be mounted in the orientation most convenient for wiring. LOCAIION should be dry, protected and close to the 24 volt power supply and external controller.