电流开关 CS10-R
Current Relay CS10-R
技术数据
Technical data
CS10-R
电源
power supply
AC220V,AC230V,AC240V,AC110V
AC120V,AC127V,50/60Hz
功耗
Power consumption
<1.2W
接线端子
Terminals
Conductors up to 4mm2
防护等级
Protection class
IP30
环境温度
Ambient temperature
-25 °C to +45°C
使用寿命
Life span
>100,000h
额定电流
Rated current
2.5A
额定动作点
Rated acting point
More than 1/3 selected load lost
响应时间
Response time
<1s
初使化时间
Initial time
<3s
继电器触点
Relay contacts
1NO+1NC
继电器触点额定开断容量
Rated contacts switching capacity
AC-15/250V 6A
绝缘强度
Insulating strength
AC2000V, 50Hz, 1Min
安装位置
Location mounted
As desire
安装方式
Mount method
Mount at DIN35 rail
外壳材料
Material of enclosure
Insulating material according to DIN7708
The CS10-R current switch can identify losing of 50W load. The selection switch can be set in 50W,100W,150W,300W load position, if more than 1/3 selected load lost, then the current switch’s alarm lamp bright, and output relay’s 1/2 can close, 3/4 can open. The normal lamp bright when the load is normal, output relay’s 1/2 can open, 3/4can close.
The typical application is to monitor the work status of heat-ing element. When the load lose more than 1/3, the current switch will alarm, the alarm indicator will bright, and the con-tacts of relay will switch.
Application
CS10-R电流开关，能识别50W的负载缺失,也就是在50W、100W、150W、300W的四档选择里，如果任何一档的实际应用负载，缺失1/3以上，则电流开关报警指示灯会发红光，输出继电器触点1/2会闭合，触点3/4会断开。如果工作正常，则工作指示灯发绿光，输出继电器触点1/2会断开，触点3/4会闭合。
典型的应用场合为监视加热元件的工作状态。当加热元件开路时，电流开关的告警指示灯会亮起，其辅助接点就会输出告警信号；当组合式加热元件中部分缺失，电流开关也会告警。
应用场合