化粪池钢模具制作原理及降解原理介绍-建信模具
化粪池钢模具制作原理及降解原理介绍-建信模具
产品价格:¥100.00(人民币)
  • 供应数量:1
  • 发货地:河北-保定市
  • 最小起订量:1个
  • 免费会员
    会员级别:免费会员
    认证类型:企业认证
    企业证件:通过认证

    商铺名称:保定建信模具制造有限公司

    联系人:冉经理()

    联系手机:

    固定电话:

    企业邮箱:

    联系地址:

    邮编:

    联系我时,请说是在五金机电网上看到的,谢谢!

    商品详情
      化粪池的制作原理是将这些垃圾废物在化粪池池底进行分解,上层的水化物体进入管道流走,防止管

      道堵塞,沉积的垃圾污泥等废弃物消化降解产生沼气、二氧化碳、硫化氢等消化气,消化气的上浮作

      用对垃圾污泥等废弃物产生扰动,让污泥与生物菌群产生充分混合,提高降解率。底部污泥随消化气

      上升,气泡溢出后,污泥再沉淀,重复循环的过程就是对污泥进行厌氧消化的这么一个处理系统水泥

      件设备

      化粪池降解原理。沉淀在模具中的污泥经过3个多月的厌氧消化后,污泥中的有机物分解为稳定的无机

      物,易腐烂的原污泥转化为稳定的熟化污水。污泥改变了污泥的结构,降低了污泥的含水量。污泥被

      定期清除并运出、填埋或用作肥料。
      2. Principle of septic tank degradation. After more than 3 months of anaerobic digestion 

      of the sludge precipitated in the mold, the organic matter in the sludge is decomposed 

      into stable inorganic matter, and the perishable raw sludge is transbed into stable 

      maturing sewage. Sludge changes the structure of sludge and reduces the water content of 

      sludge. Sludge is regularly removed and transported out, buried or used as fertilizer.
        

    在线询盘/留言
  • 0571-87774297